Construction Trucks Mix | Vinyl Wall Decals

• Step 1: Select amount of colours
• Step 2: Select pack size
• Step 3: Enter your preferred colour choices in the text field (according to your colour selection) 

Example:

• Colour: 4 Colours
• Pack Size: 48 Pack
• Text Field: 4 Colours: Black / Rust / Latte / Beige

Refer to the colour chart shown in the product images for all available colours.

• Digger: 12.5cm W x 11cm H
• Tipper: 7.5cm W x 11cm H
• Dozer: 8cm W x 11cm H

• 1 Colour / 12 Pack
• 1 Colour / 24 Pack
• 1 Colour / 36 Pack
• 1 Colour / 48 Pack
• 1 Colour / 60 Pack
• 1 Colour / 72 Pack
• 1 Colour / 84 Pack
• 1 Colour / 96 Pack
• 2 Colours / 24 Pack
• 2 Colours / 48 Pack
• 2 Colours / 72 Pack
• 2 Colours / 96 Pack
• 3 Colours / 36 Pack
• 3 Colours / 72 Pack
• 4 Colours / 48 Pack
• 4 Colours / 96 Pack
• 5 Colours / 60 Pack
• 6 Colours / 72 Pack

*Coverage examples for a 2.4m x 3.6m area shown in product images.

• Refer to the product images for a colour chart of our available vinyl decal colours.

• Image 1: Dark Grey
• Image 2: Dark Blue / Signal Yellow / Lagoon / Light Grey (4 Colours)
• Image 3: Beige
• Image 4: Dark Blue (Pack Example)
• Image 5: Dark Blue / Signal Yellow / Lagoon / Light Grey (Coverage Example)
• Image 6: Multi-Colour Options
• Image 7: Colour Chart

• RANDOM APPLICATION:

Apply one sheets worth at a time evenly over your chosen area, this way you can work your way towards the best end result.
DO NOT start at one end and work your way across to avoid running short.

• EVEN APPLICATION:

For straight and even alignment, before applying, run lengths of painters tape across your chosen surface. Measure and mark the desired spacing along each length of painters tape and apply decals accordingly.

Or you can always get creative and make the space your own.
Treat each decal as if it's the last and you will do just fine.

Made from high quality matte finish removable vinyl which is specifically designed for interior walls.

Our VINYL decals are a single-use removable product which can be easily removed without effecting the applied surface.

• Apply to a clean, smooth, dry and non-porous surface.

• Avoid applying to rough surfaces such as textured, rendered or bricked walls.

• DO NOT apply to painted surfaces where low-VOC, "Green", Teflon or silicone based paints "Wash & Wear" have been used.

• Freshly applied paint should be allowed to cure for a minimum of three full weeks before application to allow for out-gassing.

• NOT REUSABLE or REPOSITIONABLE

• Application Temperature > +10° C

• Made with an approved (European Regulation (EC) no. 1272/2008) soft PVC film with a polyacrylate adhesive.